EdgeTalk

Here is my version of the JS HighJump Oscillator

Under the Parameters Tab

Threshold Double 95 0 10000
Lookback Double 200 0 10000
SN1 Double 3 0 100
SN2 Double 6 0 100


Under the Script Tab here is the code

MA17: MA(C, 17),norender;
MA50: MA(C, 50), norender;
MA200: MA(C, 200),norender;

HJ: (C - MA17)/MA17 + (C - MA50)/MA50 + (C - MA200)/MA200,norender;
MAXHJ: HHV(HJ, LOOKBACK),norender;
MINHJ: LLV(HJ, LOOKBACK),norender;

OSC: IF(HJ > 0, HJ / MAXHJ * 100, HJ / MINHJ * -100),Width1,ColorBlue;
Sig1: MA(Osc,SN1),Width2,ColorBlack;
@SETTEXTVISIBLE(Sig1, false);
Sig2: MA(Osc,SN2),Width2,ColorRed;
@SETTEXTVISIBLE(Sig2, false);

UPPER: THRESHOLD,colorgray,width2;
LOWER: -THRESHOLD,colorgray,width2;
MIDDLE: 0,colorgray,width1;

dist:=Upper-Lower;
hf:=Upper-dist*0.236;
cfh:=Upper-dist*0.382;
Mid:Upper-dist*.5,Crossdot,ColorBlack,norender;
cfl:=Upper-dist*0.618;
lf:=Upper-dist*0.764;
FillRgn(1,Upper,HF),ExtendLR,Brush#30FFA500;
FillRgn(1,CFH,CFL),ExtendLR,Brush#60B0C4DE;
FillRgn(1,Lower,LF),ExtendLR,Brush#30FFA500;
FillRgn(Osc>SiG1,Osc,Sig1),Brush#300000FF;
FillRgn(Osc<Sig1,Osc,Sig1),Brush#30FF0000;
FillRgn(Sig1>Sig2,Sig1,Sig2),Brush#600000FF;
FillRgn(Sig1<Sig2,Sig1,Sig2),Brush#60FF0000;

FillRgn(Osc>Upper,Osc,Upper),Brush#80FF0000;
FillRgn(Osc<Lower,Osc,Lower),Brush#7000FF00;

@SETYMINMAX(-120, 120);
@SETTEXTVISIBLE(UPPER, false);
@SETTEXTVISIBLE(LOWER, false);
@SETTEXTVISIBLE(MIDDLE, false);



I added 2 signal lines & added colored areas between the Osc and the 2 signal lines, Colored the upper & lower zones in a fibonnaci zone. I also colored in an area when the Osc goes above or below the Threshold

Here is the chart
the modified indicator is in the bottom panel

Looks good,

Thanks Henry!

This version also takes into account the 100 MA

Use the same Parameters tab from the above post

Here is the script code

MA17: MA(C, 17),norender;
MA50: MA(C, 50), norender;
MA100: MA(C, 100),norender;
MA200: MA(C, 200),norender;

HJ: (C - MA17)/MA17 + (C - MA50)/MA50 + (C - MA100)/MA100 + (C - MA200)/MA200,norender;
MAXHJ: HHV(HJ, LOOKBACK),norender;
MINHJ: LLV(HJ, LOOKBACK),norender;

OSC: IF(HJ > 0, HJ / MAXHJ * 100, HJ / MINHJ * -100),Width1,ColorBlue;
Sig1: MA(Osc,SN1),Width2,ColorBlack;
@SETTEXTVISIBLE(Sig1, false);
Sig2: MA(Osc,SN2),Width2,ColorRed;
@SETTEXTVISIBLE(Sig2, false);

UPPER: THRESHOLD,colorgray,width2;
LOWER: -THRESHOLD,colorgray,width2;
MIDDLE: 0,colorgray,width1;

dist:=Upper-Lower;
hf:=Upper-dist*0.236;
cfh:=Upper-dist*0.382;
Mid:Upper-dist*.5,Crossdot,ColorBlack,norender;
cfl:=Upper-dist*0.618;
lf:=Upper-dist*0.764;
FillRgn(1,Upper,HF),ExtendLR,Brush#30FFA500;
FillRgn(1,CFH,CFL),ExtendLR,Brush#60B0C4DE;
FillRgn(1,Lower,LF),ExtendLR,Brush#30FFA500;
FillRgn(Osc>SiG1,Osc,Sig1),Brush#300000FF;
FillRgn(Osc<Sig1,Osc,Sig1),Brush#30FF0000;
FillRgn(Sig1>Sig2,Sig1,Sig2),Brush#600000FF;
FillRgn(Sig1<Sig2,Sig1,Sig2),Brush#60FF0000;

FillRgn(Osc>Upper,Osc,Upper),Brush#80FF0000;
FillRgn(Osc<Lower,Osc,Lower),Brush#7000FF00;

@SETYMINMAX(-120, 120);
@SETTEXTVISIBLE(UPPER, false);
@SETTEXTVISIBLE(LOWER, false);
@SETTEXTVISIBLE(MIDDLE, false);

Here is the indicator for those who want to change the MA's to their own

Under the parameter tab

Threshold Double 95 0 10000
Lookback Double 200 0 10000
MN1 Double 17 0 1000
MN2 Double 50 0 1000
MN3 Double 100 0 1000
MN4 Double 200 0 1000
SN1 Double 3 0 100
SN2 Double 6 0 100

under the script tab here is the code

MA1: MA(C, MN1),norender;
MA2: MA(C, MN2),norender;
MA3: MA(C, MN3),norender;
MA4: MA(C, MN4),norender;

HJ: (C - MA1)/MA1 + (C - MA2)/MA2 + (C - MA3)/MA3 + (C - MA4)/MA4,norender;
MAXHJ: HHV(HJ, LOOKBACK),norender;
MINHJ: LLV(HJ, LOOKBACK),norender;

OSC: IF(HJ > 0, HJ / MAXHJ * 100, HJ / MINHJ * -100),Width1,ColorBlue;
Sig1: MA(Osc,SN1),Width2,ColorBlack;
@SETTEXTVISIBLE(Sig1, false);
Sig2: MA(Osc,SN2),Width2,ColorRed;
@SETTEXTVISIBLE(Sig2, false);

UPPER: THRESHOLD,colorgray,width2;
LOWER: -THRESHOLD,colorgray,width2;
MIDDLE: 0,colorgray,width1;

dist:=Upper-Lower;
hf:=Upper-dist*0.236;
cfh:=Upper-dist*0.382;
Mid:Upper-dist*.5,Crossdot,ColorBlack,norender;
cfl:=Upper-dist*0.618;
lf:=Upper-dist*0.764;
FillRgn(1,Upper,HF),ExtendLR,Brush#30FFA500;
FillRgn(1,CFH,CFL),ExtendLR,Brush#60B0C4DE;
FillRgn(1,Lower,LF),ExtendLR,Brush#30FFA500;
FillRgn(Osc>SiG1,Osc,Sig1),Brush#300000FF;
FillRgn(Osc<Sig1,Osc,Sig1),Brush#30FF0000;
FillRgn(Sig1>Sig2,Sig1,Sig2),Brush#600000FF;
FillRgn(Sig1<Sig2,Sig1,Sig2),Brush#60FF0000;

FillRgn(Osc>Upper,Osc,Upper),Brush#80FF0000;
FillRgn(Osc<Lower,Osc,Lower),Brush#7000FF00;

@SETYMINMAX(-120, 120);
@SETTEXTVISIBLE(UPPER, false);
@SETTEXTVISIBLE(LOWER, false);
@SETTEXTVISIBLE(MIDDLE, false);